These removable tie-down anchors provide attachment points for straps or bungee cords, so you can secure the cargo on your trailer. Easily remove anchors when not in use for an obstacle free trailer bed.
Features:
Specs:
Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
To start the easy installation process, select your tie down location. First, use a 1-1/4" hole saw to drill the hole for your receiver and seethe the receiver into the hole flush with the trailer deck. Second, drill out the four bolt holes and install the bolts through the receiver to locate the backing plate and use the supplied lock nuts to secure it into position. The third and last step is to simply insert one of the tie-down accessories into the Rapid Switch Systems Receiver, push firmly down and turn clockwise to lock in position. When not in use, once again, push down firmly and turn counter-clockwise to release. It's as simple as one, two, three.
For your active lifestyle, the more receivers you installed gives you more options for cargo whether it be for work or play.Rapid Switch System Tie-downs can secure any sized cargo. They're made of full stainless steel construction and rotate 360 degrees for any chosen load angle. When you need to get the work done easier having options is imperative with the Rapid Switch Systems Tie-downs you always have the best way to hook those straps ready and available. If your first thought doesn't work out, there's always another option to secure your load safely and efficiently. And thanks to the Rapid Switch Systems Flush Mount Receiver, you'll never have to worry about tripping over one of your accessories.
Simply remove the one that's not needed to avoid those trip hazards. When it's time to have some fun on the ATV, four wheeler or motor bike, you'll need the flexibility to drive right up to the trailer, hook up securely and hit the road for some fun.With tie-downs in all the needle locations, strapping down your bike becomes easier than ever. Once you're at your destination the flush mount design makes it easy to unhook and back right off the trailer without the concern of damaging your wheels or aggravation of having anything in your way. All that's left to do now is get cranked up and have some high octane fun in the sun, whether on two wheels or one. Rapid Switch System Tie-downs are your answer to any type of cargo hauling for work, or play and installation is as simple as one, two, three..
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.